Free Delivery On Orders Over £200 to UK Mainland

Description

SELECT YOUR IDEAL CONFIGURATION FROM THE CHOICES BELOW

SEE FULL DETAILS IN THE SPECIFICATIONS TAB ABOVE

 

UltraZoom-6 AXIAL ZOOM Stereo Zoom Microscope for Through Axis Observation – Trinocular, SICZ

for Through Axis Observation – Complete with SICZ (Simultaneous Independent Camera Zoom)

(PLEASE ALSO SEE THE SPECIFICATION TAB)

 

 

 

 

 

 

 

 

 

 

The perfect stereo zoom microscope for dissections, electronics assembly, gem setting, jewellery manufacturing, fine engraving and numerous other tasks where manipulative work is undertaken under microscope.

Why is it so good?

AXIAL ZOOM

This microscope has its optical path all aligned in the same direction as you look.  The eyepieces are not offset at an angle of 45 degrees as with conventional microscopes.  This ‘through-axis’ capability makes hand/eye coordination intuitive, simple, more relaxing and therefore more controlled.  This is exactly how most surgical microscopes are arranged.

SICZ (Simultaneous Independent Camera Zoom)

ID 1043 XTL-AXIAL ZOOM STEREO MICROSCOPE

This microscope has a complete set of optical zoom components specifically for the camera which synchronously move through the zoom range along with the two viewing zoom objectives.  The advantages of this are enormous:

  • SIMULTANEOUS VIEWING through both eyepieces and to the camera
  • NO LIGHT SHARING to the camera port – other simultaneous viewing stereo microscopes share the image from one objective with the camera and eyepiece.  With tis system 100% of the light goes to the camera.
  • A MORE INCIDENT VIEW the camera optics are configured more vertically to give a less oblique view
  • ERECT IMAGE the image to the camera passes through less prisms, leaving the image erect, making movement guided by the camera image only, much easier.
  • TWO MICROSCOPES IN ONE in effect you now have not only a 3D Stereo Zoom microscope but a classically popular Monozoom photography system built into one microscope.

OVERVIEW:

MOUNTING THE MICROSCOPE HEAD

  • This microscope head will fit onto numerous different microscope stands which have an 84mm microscope head holder (you can mount this holder onto most stands).  The choice of stands is shown below.

​HIGH BUILD QUALITY

  • This is a professional grade, zoom stereo microscope with a high optical quality, an ultra-modern stand and build quality normally only found on much more expensive systems.
  • ​This is why we are able to extend our lifetime warranty offer to all users (conditions apply)

MAGNIFICATION RANGE

  • The UltraZoom-6 AXIAL ZOOM has a magnification zoom range of: 7X-45X, expandable to a massive 1.05X-360X with options.  See the table below for full details.
  • ​Each microscope is supplied with a pair of 10X widefield eyepieces field number 22mm  along with a pair of rubber eyeguards

​CAMERA PORT

  • Every microscope is supplied inclusive of a side mounted Camera Port
  • Every microscope is supplied with a 0.5X c-mount adapter fitted (additional adapters for different sensor sizes and different types of cameras (eg DSLR) are available).
  • It is equipped with the advanced Simultaneous Independent Camera Zoom optical system on the trinocular head as standard for live image viewing capture and analysis.

OPTICAL QUALITY​

  • The UltraZoom-6 AXIAL ZOOM has superb quality coated optics which deliver a bright, crisp, high resolution image in beautiful 3D.  The 3D effect is produced by the presence of a pair of angled zoom objectives each of which presents a slightly different view of the subject and transmits this to each eyepiece.

PLEASE SEE THE SPECIFICATION TAB

FOR CAMERAS PLEASE CLICK HERE: Cameras for Microscopes

SELECT YOUR IDEAL CONFIGURATION FROM THE CHOICES BELOW

ACCESSORIES – see the accessories tab for a complete list

Additional information

Weight 15 kg
Brand

GX Microscopes

Magnification

Zoom

Model Series

UltraZOOM

Area Of Interest

Artwork Curators, Jewellers & Watchmakers, Materials & Industrial Inspection, PCB Inspection & Mobile Phone Repair, Wafer Inspection

Specifications

OPTIONAL ACCESSORIES for XTL+AXIAL ZOOM STEREO MICROSCOPE

(ID: 1043)

Product ID
 

 

EYEPIECES

Pair 15X field number 16mm 3676
Pair 20X field number 12.5mm 3683
Pair 25X field number 11mm 4987
Pair 30X field number 9mm 1001
Pair 40X 1043E40
10X /22 Focussing Eyepiece with 100 division crosshair reticle for measurements 3690
EYEGUARDS Pair of rubber eyeguards A7060
 

 

AUXILIARY OBJECTIVES
each objective can be screwed onto the end/bottom of the head. No tools needed, takes a few seconds.

WORKING DISTANCE
0.3X 250mm 1043ON03-250
0.3X 300mm 1043ON03-300
0.5X 156mm 1043OB05
0.75X 102mm 1043OB75
1.5X 44mm 1043OB15
2X 45mm 1043OB2
CAMERA ADAPTERS
This fits into the camera port on the top of the head of the microscope
0.5X C-mount Suitable for most microcroscopy cameras with a sensor size of 0.5in and below included
1X C-Mount Suitable for most microcroscopy cameras with a sensor size of more than 0.5in 1043CM1
DSLR See our DSLR Kit on our camera adapters page
LED RING LIGHT ILLUMINATORS
These attach to the bottom of the head sing the screw on ring holder supplied
iLUMos QUADLED adjustable Intensity with Segment Control 2396i
iLUMos std LED Ringlight 2402i
LED SPOT ILLUMINATORS iLUMos Free standing High Intensity Dual Gooseneck LED Microscope Illuminator 0153i
iLUMos Dual Gooseneck LED Microscope Illuminator 0511i

 

MICROSCOPE MODEL XTL-AXIAL

magnification table

AUXILIARY OBJECTIVES
EYEPIECES 0.3X
(WD250mm)

(WD 300mm also available)
0.5X
(WD156mm)
0.75X
(WD102mm)
NONE 
(WD95mm)
1.5X (WD30mm) 2X
(WD30mm)
10X 2.1-13.5X 3.5-22.5X 5.2-33.7X 7-45X 10.5-67.5X 14-90X
20X 4.2-27X 7-45X 10.5-67.5X 14-90X 21-135X 28-180X
25X 5.2-33.7X 8.7-56.2X 13.1-85.3X 17.5-112X 26.2-168.7X 35-225X
30X 6.3-40.5X 10.5-67.5X 15.7-101.2X 21-135X 31.5-202.5X 42-270X
40X 8.4-54X 14-90X 21-135 28-180X 42-270X 56-360X
These values are the optical magnification zoom range to the eyepieces
Items in BLUE are suppled as standard, all other items are options
WD= Working Distance   (a 1X auxiliary Objective is also available)

(please note the design and specifications of these accessories may vary slightly from the pictures shown from time to time)

MICROSCOPE STANDS
ARTICULATED ARM DESK BASE STAND (PRODUCT ID: A20-50-60-25-84)
IDA20-50 Long Reach, Articulated Arm, Desk Base, Microscope Stand
Vertical Pillar height: 42.5cm (49 cm including the base)
Articulated Arm Maximum length: 85cm (99.5cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
3 Articulation Points
Articulated Arm Spring-Loaded Height Adjustment Range: 49cm
E-Arm Socket at end of Articul;ated Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holder
ID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 84mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)
BOOM ARM DESK BASE STAND (PRODUCT ID: A20-40-60-25-84)
IDA20-40 Long Reach, Boom Arm, Desk Base, Microscope Stand
Vertical Pillar height: 42.5cm (49 cm including the base)
Horizontal Boom Arm length: 54.5cm (69cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
Horizontal Boom Arm diameter: 32mm
E-Arm Socket at end of Horizontal Boom Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holderID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 76mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)
BOOM ARM G_CLAMP STAND (PRODUCT ID: A30-40-60-25-84)
IDA30-40 Long Reach, Boom Arm, G-Clamp, Microscope Stand
Vertical Pillar height: 42.5cm (49 cm including the base)
Horizontal Boom Arm length: 54.5cm (69cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
Horizontal Boom Arm diameter: 32mm
E-Arm Socket at end of Horizontal Boom Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holderID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 84mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)
ARTICULATED ARM G-CLAMP STAND (PRODUCT ID: A30-50-60-25-84)
IDA30-50 Long Reach, Articulated Arm, G-Clamp, Microscope Stand
Vertical Pillar height: 42.5cm (49 cm including the base)
Articulated Arm Maximum length: 85cm (99.5cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
3 Articulation Points
Articulated Arm Spring-Loaded Height Adjustment Range: 49cm
E-Arm Socket at end of Articul;ated Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holder
ID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 84mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)
ARTICULATED ARM SMALL DESK BASE STAND (PRODUCT ID: AV02-50-60-25-84)
IDAV02-50 Long Reach, Articulated Arm, Small Desk Base, Microscope Stand
The space saving  base has 4 securing bolts that must be used to attach it to a benchVertical Pillar height: 42.5cm (49 cm including the base)
Articulated Arm Maximum length: 85cm (99.5cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
3 Articulation Points
Articulated Arm Spring-Loaded Height Adjustment Range: 49cm
E-Arm Socket at end of Articul;ated Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holder
ID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 84mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)
ARTICULATED ARM WALL MOUNT STAND (PRODUCT ID: AV03-50-60-25-84)
IDAV03-50 Long Reach, Articulated Arm, Small Desk Base, Microscope Stand
The wall mount has 4 securing bolts that must be used to attach it to a wallVertical Pillar height: 42.5cm (49 cm including the base)
Articulated Arm Maximum length: 85cm (99.5cm with typical microscope holder attached)
Vertical Pillar diameter: 31.5mm
3 Articulation Points
Articulated Arm Spring-Loaded Height Adjustment Range: 49cm
E-Arm Socket at end of Articul;ated Arm, Socket diameter 15.9mm (takes any end arbour holder with an E-Arm)
At least 4Kg load on microscope holder
ID AV60-25 E-Arm 25mm end arbour with adjustable angle joint
ID 4673 84mm microscope holder with tension adjustable focus knobs
(Requires Illumination see our iLUMos range HERE)

Accessories

How its works

Stereo microscopes, also known as dissecting and low power microscopes, are used to examine any specimen that is not mounted on a slide (although many slide mounted specimens can be observed).  They are particularly useful for examining unprepared specimens that are not thin and are ‘lumpy’ such as insects, plants, geological specimens, fossils, industrial parts, pcbs, coins, archaeological artefacts, pond life, invertebrates, zoological specimens, embryos, forensic samples, textiles etc.  Long working distance versions are ideal for working under. 

You will find these different types of stereo microscopes in this catalogue:

· Single Magnification Stereo Microscopes – change magnification by changing objective cartridges and/or eyepieces (lowest cost microscopes)

· Zoom Magnification Stereo Microscopes – the most popular type of microscope where you change magnification using a zoom control knob

· Long Reach Stereo Microscopes – highly popular in industry & restoration for observing larger specimens or where a large, clear work area is required – see long reach microscopes below in all our ranges

Stereo microscopes always have two eyepieces, each eyepiece takes an image from its own objective (there are always 2 objectives).  Each objective is positioned at an angle pointing at the subject.  In this way a 3 dimensional image is perceived through the eyepieces, hence the term ‘stereo’

W.D. = Working Distance.  This is the  distance from the end of the objective lens to the point on your subject that is in focus.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

We Also Recommend