Free Delivery On Orders Over £200 to UK Mainland

01284789697

sales@gtvision.co.uk

Zeiss Microscope CMount Adapter fits 30mm Port

£191.17

Price Excludes VAT & Delivery
Enquire now
SKU ZEISSCM-30-0006 Category

Description

ZEISSCM-30

Zeiss Microscope C-Mount Adapter for a C-Mount Microscopy Camera.   Fits onto a Zeiss 30mm Camera Port

Choose from these magnifications: 0.35X 0.5X, 0.65X 0.8X 1X OR 1.2X

  • This high quality adapter converts the Zeiss trinocular head microscope phototube/camera port (with standard ISO 30 mm (1.18 inch) outer diameter for the insertion end) to a traditional C-Mount type threaded male end (25.4 mm or 1 inch diameter with 32 threads per inch) for the attachment of any c-mount microscopy camera eg GT Vision’s GXCAM range.
  • This adapter includes a built-in reduction lens choose one of these magnifications 1.2X,1X, 0.8x 0.65X, 0.5X or 0.35X for achieving an optimum field of view from microscope photube according to the size of the camera sensor
  • Compatible with Zeiss 60N-C microscope adapter
  • Material: anodized aluminum
  • Telecentric optics with low light deficiency
  • Parfocal with different microscope objective lenses
  • Diffraction limited MTF
  • Aperture is totally coupled with UIS microscope objective’s exit pupil
  • These adapters are GXMicroscope Brand Adapters

Specially designed for

  • Axio Examiner.A1; Axio Examiner.D1; Axio Examiner.Z1;
  • Axio Imager Vario; Axio Imager.A1; Axio Imager.A1m; Axio Imager.A2; Axio Imager.A2m; Axio Imager.D1; Axio Imager.D1 for epi-fluorescence with ApoTome equipment; Axio Imager.D1m; Axio Imager.D2; Axio Imager.D2m;
  • Axio Imager.M1 (Axio Imager.M1 for KS ELISPOT); Axio Imager.M1m; Axio Imager.M2; Axio Imager.M2m; Axio Imager.Z1; Axio Imager.Z1 + ApoTome; Axio Imager.Z1m; Axio Imager.Z2; Axio Imager.Z2m;
  • Axio Lab.A1; Axio Lab.A1 FL-LED; Axio Lab.A1 MAT; Axio Lab.A1 Pol;
  • Axio Observer.A1; Axio Observer.A1 Entry; Axio Observer.D1; Axio Observer.D1 Entry; Axio Observer.D1 Mid Range; Axio Observer.Z1; Axio Observer.Z1 High End;
  • Axio Scope.A1; Axio Scope.A1 Pol; Axio Scope.A1 Vario; Axio Vert.A1; Axio Vert.A1 FL; Axio Vert.A1 FL-LED; Axio Vert.A1 MAT;
  • Axio Zoom.V16;
  • PALM CombiSystem Rel. 4.2; PALM MicroBeam; PALM MicroBeam Rel.4.2; PALM MicroTweezers Rel.4.2;
  • Stemi 508 doc; Stemi 508 trino;
  • SteREO Discovery.V12; SteREO Discovery.V8; SteREO Lumar.V12 micoscope

​Choosing the magnification required:

MICROSCOPE C-MOUNTS AND IMAGE SENSORS

A microscope c-mount adapter is used to connect a microscope camera to the microscope trinocular port. A c-mount adapter has a standard 1″ (or 25mm) diameter male thread. This thread matches with the female thread on the camera. C-mount adapters are microscope specific in that the lenses are made to match up with your specific microscope. For example, you cannot to use an Olympus C-Mount adapter on a Meiji microscope. This would most likely result in an image that is not parfocalled, or is not in focus at the same time that your eyepieces are in focus. C-Mount adapters have lenses in them in order to match up with the similar magnification you are seeing through the 10X eyepieces. If you were to use a c-mount adapter with no lenses built into it you would see more magnification than what the eyepieces are currently seeing. This is due to the inherent magnification with image sensors and microscopes. Although this setup can work, most people generally prefer an image that looks similar to their field of view through the microscope.

  

Matching Chip Size with C-Mount Adapters
To compensate for too much magnification at the camera, or to most closely match the field of view in the microscope, you will need a c-mount adapter with a reduction lens built into it. The chart on the right lists the suggested adapter to use when using 10x eyepieces in your microscope, based on the chip size in the camera.
When using 20x eyepiece you will generally move up one step in magnification. If you had a 1/2″ chip with 10x eyepiece the corresponding c-mount would be 0.45x or 0.5x. With 20x eyepieces you would want to use the 0.7x c-mount adapter.
If you were to use a camera with a 1/2″ chip in it with a 0.7x c-mount adapter the camera would still work, you would just have a smaller field of view and more magnification at the camera than you would see through the eyepieces.

Image Sensors
 

 

Cameras have image sensors that are fairly small. The most common image sensor sizes are shown at left. The smaller the sensor, the more inherent magnification. The larger the camera sensor, the better the resolution will be with less magnification.

Image resolution is key in most microscopy imaging applications and therefore 1/2″ and 2/3″ chip cameras usually offer a good balance between magnification, resolution and the size of the actual image the camera is viewing.

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

We Also Recommend

Related Products

Company

Follow Us On:

Facebook Instagram Twitter Envelope

We Accept:

Customer Support

Copyright © 2021 GT Vision Ltd. All Rights Reserved

Website by MIRA Marketing

Use this delivery method if you live in the Channel Islands. Delivery times 3-7 days typically.

No VAT will be charged on your purchase if the delivery address is to the Channel Islands.

All orders for stock items are dispatched within 2 working days using a 3-7 working day delivery service.

Please note, we regret that, because of the cost of delivery of items to your region, by selecting this delivery method, you agree that you will pay the difference in price (compared to UK rates) of any delivery charges for any replacement or repair within the warranty period. (If you do not wish to accept these terms please do not proceed with your order.)

All orders for stock items are dispatched within 2 working days using a 2-5 working day delivery service.

If the delivery charge is the same as the std mainland UK rate the condition below does not apply.

Please note if your delivery charge is higher than the std mainland UK rate that is because it is more expensive to deliver items weighing over 0.6Kg by courier to your region and the condition below therefore applies:

Please note, For any consignment weighing over 0.6Kg we regret that, because of the cost of delivery of items to your region, by selecting this delivery method, you agree that you will pay the difference in price (compared to std mainland UK rates) of any delivery charges for any replacement or repair within the warranty period. (If you do not wish to accept these terms please do not proceed with your order.)

Scottish Highlands means these postcodes as defined by our carriers: AB1-9/14/21-23/30-39/41-45/51-/56. IV1 – 56. KW1 – 14. KA27 – 28. PA20 – 39. PH11 – 40. FK19 – 21